Protech Tojeiro EP with Wing span: 1,1 meter - Length: 1,2 meter - Motor: Dualsky XM35-48CA - Power pack: 3S lipo - Propeller: APC 12x7 - Flying weight: 1,25kg.

Tommy flies his QQ Pitts Python for the first time at all at Østjydsk R/C Modelflyveklub

First test flight with: X model Blade 1,5 glider, converted to elektric glider. Homemade nose cone with: Turnigy TR 35-30A 1700kv Brushless, 40 Amp ESC and 1050Mha 3 cell batt + 9x5 folding prop. Plenty of power for the Blade. I made it to get hight and speed for DS. Can change to normal glider again in 45 sek.

Adrenaline 120 FS from YT International made for F3A or 3D with Wingspann: 1,73 meter - Length: 1,68 meter - Engine: OS 20ccm Four stroke120fs Surpass III w/p, - Propeller: APC 14x10 - Mufler: Merker and Stueckerjuergen - Flying weight: 4,6kg

My new Flash, outdoor 3D plane from Rc factory, with Turnigy TR 35-30A 1700kv Brushless and 1050Mha 3 cell batt, , flying indoor.

Engel Modellbau CAP 232 with Wingspan: 2,15 meter - Length: 2.32 meter - Engine: DL 50 ccm Two Stroke Gasoline - Propeller: Mentz 22x12 - Muffler: MTW - Flying weight: 8,7 kg.

Small camera on a twinstar2. Recorded 29-04-2009 at Dronninglund modelflyveklub, Denmark

My home town Sæby. (21 December 2009) Just had 10 cm snow the night before, Take off at 1100. Video recorded from Piaget epp 3d RC plane. with flycamone2. Hand takeoff, and catch landing from the lawn.

Camera fitted on a moviestar. Recorded 29-04-2009 at Dronninglund Modelflyveklub, Denmark.

Electric Windrider Fox doing some very low flying, too low :D Equipped with Hobbyking towerpro BM2410-08T / 18A BEC combo. Batt: Rhino 750 mha, 3cell. 8x4,5 folding prop.It gives 15 min flight time.(If you dont hit the ground)