63" span zlin 50L with a Turnigy 50-65 320KV motor, 100A ESC, 6s 5000mah li-po, 18 x 12 prop, AUW 7.1lbs, Thrust = 9.8lbs thats over 1KW of power. All the power system was bought from hobbycity in Hong Kong, great guys, superb prices...why pay silly UK prices any more!

Trex 500esp with Turnigy 6S 2650mah 30C

A demonstration of my new motor www.hobbyking.com . This was movie was made for the benefit of those following this thread on rcgroups: www.rcgroups.com

Turnigy motor in a vice with a zippy flight max 6s 5ah 30c battery.

This tutorial shows you how to turn your old computer power supply in to a power supply that can provide enough power for your Turnigy charger or any battery charger that accepts a 12 volt input and requires less than about 10 amps. Please be careful when working with these power supplies - if the leads are allowed to.... more

Just got the new motor mounted in the T-28. I had it mounted with the original mount (have to drill two new holes) and it shredded it while watt testing. So, I made a ply-wood mount with the Dremel, and it has held up to the testing. Test flight and video coming soon! I will end up with the 30C 3S and the 11x7 Prop..... more

Second test flight with the Turnigy 52DV camera. The video is a little choppy due to the cheap Micro SD card, that came with the camera. Once I get a 4GB Micro SDHC Card the quality should be a lot better.

This is a Turnigy Piaget EPP-CF 3D plane from Hobbycity.com It turned out pretty well 250g total weight with kit motor and 800mah 2S battery. 1 9g servo for ailerons and 2 5g for rudder and elev. I consider using lighter motor and 360mah bettety for indoor flying.

A quick video showing you how to calibrate the Turnigy Accucell-6 Battery Charger. All you need is a Li-po battery pack and a good multimeter. Sorry about the shaky video in places, it was hard to be the cameraman and press the buttons on the charger at the same time! The instructions for this charger are a little.... more